Kitchen Cabinet Painting in Sarasota, FL
Serving Bird Key · Laurel Park · Palmer Ranch · Siesta Key · Downtown Sarasota
A finish that holds its own in a Bird Key kitchen. Our cabinet painters spray doors and drawer fronts off-site in a controlled shop, then warranty the result five years.
Last updated
Enter your ZIP to check availability in your area. Takes 10 seconds — no spam. We are a small local business.
- 362+
- Five-star reviews
- 4.9 ★
- Google rating
- 5 days
- Typical timeline
- Monday start, Friday reinstall
- 2017
- Serving since
Sarasota is a demanding market for this work, in two separate ways. The first is the air: a waterfront property on Bird Key or a home near Siesta Key lives in salt-laden humidity year round, and a coating never formulated for it gives up early — softening near the stove, releasing at door edges, going chalky where afternoon sun lands on the same panel every day.
The second is the standard. Sarasota homeowners tend to be design-conscious in a way that shows up in what they notice. A brush mark, an uneven reveal, a door that sits a millimetre proud of its neighbor — these register here. That is the argument for spraying rather than brushing, and for taking doors off-site rather than finishing them hanging on the box.
Between a craftsman home in Laurel Park, a luxury build on Bird Key, and a newer house in Palmer Ranch, the cabinets vary enormously. We run the job from start to finish — our crew, our process, our five-year warranty.
What cabinet painting costs in Sarasota
| Cabinet Painting | Full replacement | |
|---|---|---|
| Typical cost | $3,500–$6,500 | $12,000–$25,000+ |
Cabinet painting is priced per door and drawer front — typically $80–$160 each — so your total comes down mostly to how many you have. A typical kitchen has 25 to 40. Cabinet material matters less: open-grain woods like oak and hickory need their grain pores filled first, which smooth surfaces like MDF, maple, and birch do not.
Read the full breakdown of what drives cabinet painting cost →
Why the cheapest cabinet painting quote usually costs more in Sarasota
Cabinet painting is unusually easy to do badly in a way that looks fine for a year.
The finish on a cabinet door does not fail because someone chose the wrong color. It fails at the bond — the coating releases from the surface underneath it. That shows up as chipping at door edges, peeling around the sink and dishwasher, and a soft, tacky feel near the stove where cooking grease was never fully removed before priming.
Sarasota tests that harder than most markets, and from two directions at once.
Salt-laden humidity attacks the bond from both sides: moisture works into any unsealed edge, and a coating that stays slightly soft never stops absorbing it. An inland kitchen might carry a skipped step for a couple of years. Close to the Gulf it usually surfaces inside of one.
Then there is what gets noticed. Sarasota homeowners tend to look closely, and the failures that come from cutting preparation are visible failures — texture where there should be none, a sheen that is not even across a door, hardware with paint in the hinge cup. On a kitchen where the rest of the room was chosen carefully, those details are not small. Nor is repainting the room to put them right.
Before you accept any quote, there are five questions worth asking any cabinet painter — about whether doors come off, which degreaser is used and when, which primer and why, whether the topcoat is KCMA-certified, and who honors the warranty. The first one is the tell here: doors finished hanging on the box cannot be finished evenly, and on a high-end kitchen that shows.
What a high-end finish actually consists of
“Premium finish” is a phrase every contractor uses. In practice, on a Sarasota kitchen, it comes down to a small number of things you can check with your own eyes.
No texture, anywhere. A sprayed finish has no brush marks and no roller stipple. Run a hand across a door and it should feel like a manufactured surface, because that is the method being reproduced. Any texture at all means it was not sprayed, or it was sprayed badly.
Consistent sheen across every door. Sheen varies when film thickness varies, and film thickness varies when doors are finished hanging on the box rather than laid flat in a controlled environment. Stand at the end of a run of cabinets and look down it at an angle — inconsistency shows up there before anywhere else.
Clean, even reveals. The gaps between doors should be uniform. This is a reassembly question rather than a finish question, and it is where rushed jobs give themselves away.
Hardware with no paint on it. Hinge cups, screw heads, and the inside edges of pulls should be clean. Paint in a hinge cup means hardware was painted in place, which changes how a door sits and is visible every time it opens.
Edges and undersides finished. Door edges, the underside of upper cabinets, and the interior face of the frame all get coated. These are the surfaces a shortcut skips because nobody looks at them straight on — and they are also where a finish starts failing first.
What we do to your kitchen
Doors and hardware come off and are tagged. Surfaces are professionally degreased and fully rinsed before any abrasive touches them. Sanding creates the profile the primer bonds to, and chips, dings, and the open pores in woods like oak are filled and sanded flush. A bonding primer matched to your specific cabinet material goes on next, then a KCMA-certified topcoat sprayed with HVLP or airless equipment in a controlled environment — which is what produces a film with no brush marks and no roller texture. Doors are rehung, hardware reinstalled, alignment and reveals checked, and we walk the kitchen with you before we leave.
Every step is included on every job, and each one is there for a reason — the full cabinet painting process explains what each stage does and what goes wrong when it is skipped.
Getting a real number
Start with your ZIP code. It takes a few seconds, confirms we cover your address, and leads into a short set of questions about your kitchen — then we come back with real pricing. No measuring, no appointment, and no salesperson at your counter.
If the job is complex, or once we have agreed on the general number and want to nail down scope, we will come out and see it in person. That is a step in our process, not a condition of hearing a price.
Recent cabinet painting near Sarasota
What a Sarasota homeowner said
★★★★★
“Premier was an amazing company to work with, very professional and every employee exhibited exceptional customer service, Lee Ann and Victor were knowledgeable and Alex is an amazing painter, what a craftsman. I highly recommend them.”
Questions to ask cabinet painters in Sarasota
- What Sarasota neighborhoods and areas do you serve?
- All of Sarasota, including Bird Key, Laurel Park, Palmer Ranch, Siesta Key, and Downtown Sarasota, plus Bradenton, Venice, Osprey, and Nokomis nearby. Call (727) 280-5575 to confirm coverage at your address.
- Can you match the quality expectations of Sarasota's higher-end homes?
- That is the reason we work the way we do. Doors and drawer fronts come off and are sprayed in a controlled environment rather than finished hanging on the box, which is what produces an even film with no brush marks and no roller texture — the same method cabinet manufacturers use. Hardware comes off completely rather than being painted around. On a high-end kitchen those details are the whole difference, and they are visible at arm's length.
- Do painted cabinets hold up near the water in Sarasota?
- They do when the coating is built for it. We use KCMA-certified waterborne cabinet coatings, which cure hard and resist the heat, humidity, and salt air that come with living this close to the Gulf. What does not survive here is consumer-grade wall paint, which softens and releases far faster in coastal humidity than it would inland.
- How much does cabinet painting cost in Sarasota, FL?
- Most kitchens land between $3,500 and $6,500. The number is driven mainly by how many doors and drawer fronts you have, with an average kitchen running 25 to 40 — larger kitchens, which are common in Sarasota, run above that. Replacing the same cabinets generally starts around $12,000 and climbs from there.
- My cabinets are high-end solid wood. Is painting them a mistake?
- It is a fair question and the honest answer depends on what you have. Good solid wood cabinetry is worth keeping, and painting keeps it — you are changing the finish, not the cabinets. But if what you like about them is that they read as wood, painting is the wrong tool, and a stain change under refinishing will get you a different tone while keeping the grain visible. We will tell you which of those fits before you commit.
- Why is your quote higher than the other cabinet painters I called?
- Almost always because of prep. A cabinet finish fails at the bond line, not the surface, so the cost of doing it right sits in the cleaning, sanding, filling, and priming that happen before any color goes on. A lower bid is lower because fewer of those hours are in it — and Gulf Coast humidity finds those shortcuts considerably faster than an inland kitchen would.
- How long does cabinet painting take in Sarasota?
- Five days for a typical kitchen, and only three of those have a crew in your home. Most jobs start on a Monday and are back together by Friday — two days masking and spraying the frames in place, two days finishing your doors and drawer fronts in our shop, and a final day for reinstallation. Larger kitchens run a little longer.
- What if painting is not the right choice for my kitchen?
- Then we will say so. We assess your cabinets and tell you whether painting, refacing, or refinishing actually fits what you have, including when the answer is not the service you called us about. Boxes with water damage or a layout that needs to change are not problems a finish solves.
or call (727) 280-5575